Search results for 'Red'

Tool set with denim case. Set contains 7pcs, including; 7mm Aisuki (flat), 8mm Hangi-toh (knife), 4mm Aisuki (flat), 6mm Komasuki (U), 3mm Komasuki (U), 4mm Sankatu-toh (V), 10mm Komasuki (U). These are pencil style tools with an imitation wooden handle that is longer when compared to the traditional tools, perfect as an introduction to Mokuhanga printing. Please note: the case differs from the case shown in the photo. Learn More

Photo-emulsion, this one-coat photo-emulsion is formulated to use with water based screen printing inks and water based dyes. It produces stencils with good resistance, good resolution and edge definition. Easily removed with stencil strip. This product comes in a 500ml bottle with Diazo activator solution included. Once activated the solution has a 4-6 week shelf life if stored in a light free environment. Learn More

Cornelissen Etching Press T52100B 52 x 100 cm, Bed size: 52 x 100 cm, Upper Roller Diameter: 110 mm, Lower Roller Diameter: 110mm, Weight: 83 kg. Etching press base: 56 x 44 cm. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed. Please be aware these goods are heavy and it is the customer’s responsibility to check measurements for delivery before orders are placed and to be able to receive the goods over two days.

 

Learn More

Magnesium Carbonate is traditionally used to stiffen ink. It will also reduce an ink’s gloss level. Once added to ink, Magnesium Carbonate becomes transparent and will not alter the color of the ink. We recommend adding small amounts at a time; little is needed to add body to an ink. Mix well. It can be used with both Etching and Relief Inks. Learn More

This tough scratch-resistant coloured resist is painted onto the back and edges of the plate to prevent any biting during the etching process. Learn More

Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More

This tusche can be sprayed from a simple airbrush and is required if Lascaux Lift Solution is to be used. Other airbrush techniques can be employed and tonal effects similar to aquatints in etching can be created. It can also be used for painting washes and handles like Chinese ink. When diluted it creates a further range of washes. Learn More

Charbonnel Blacks Learn More

Cornelissen Press T52100, Bed size: 52 x 100 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Weight: 106 kg. Etching press base: 58 x 63 cm. We offer press demonstrations for this model. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed.

Learn More

Tento easy grip carving set. This set comes in a plastic box and contains 5pcs, including; 7.5mm Hangi-toh (knife), 7.5mm Aisuki (flat), 6mm Komasuki (U), 3mm Komasuki (U), 3mm Sankatu-toh (V). These are pencil style tools with a soft easy grip, non-slip rubber ferrule and plastic handle. The handle is longer when compared to the traditional tools, perfect as an introduction to Mokuhanga printing. Learn More

108 x 29 x 10mm. Prepare by mixing with distilled water to desired concentration. Can be used on aquatint as well as litho plates and stones. Recommended for higher quality results. Learn More

Type of print: General Intaglio techniques and Monotype. Plate thickness needs to be no higher than 1mm. YTI18 - Width of roller 18cm, Upper roller diameter 35mm, Lower roller diameter 35mm. YTI26 - Width of roller 25cm, Upper roller diameter 35mm, Lower roller diameter 35mm **please note - blankets not included** Learn More

Transparent etching ground in cap form is a light-coloured, transparent product for etching plates that already carry sketch which is meant to remain visible under the etching ground. Learn More

This coloured granular resist is painted on the plate and used in conjunction with Lascaux Spray/aquatint to create unusual etched effects similar to watercolour or tusche washes. Learn More

This viscous tusche can be painted in a smooth even layer which can be scratched away to create delicate non-printing lines. It can also be used for a broad range of painted marks, offsetting and pattern-making. The diluted tusche dries to create granular washes that are full of character. Dry marks can be re-wet and altered if required. Learn More

Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More

Used in printmaking. Imparts softness and greasiness. An ingredient for producing soft etching ground. Learn More

This resist is painted onto the plate in a thin even layer with a soft flat square-ended brush. When this clear layer is dry it may be coloured or drawn into with etching needles, roulettes and steel wool. The waxy character allows the needle to glide through its surface. After drawing the coloured coating (if used) is removed, the image is stopped out if necessary, then the plate is etched. As the resist is clear the artist can monitor the etching process accurately. Learn More

This slow drying viscous tusche has been designed to produce effects similar to soft ground in traditional etching. Using this method soft non-printing drawings may be made and impressions of fabric, leaves, feathers and other collage materials may be taken. The tusche can also be used for a broad range of painted marks and can be drawn into with paint shapers and other tools. The diluted tusche dries to creategranular washes. Dry marks can be re-wet and altered. Learn More

Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More

Cornelissen Press T73140, Bed size: 73 x 140 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Etching press base: 78.5 x 91 cm. Weight: 148 kg. We offer press demonstrations for this model. Please call Cornelissen for more details. This press is made to order. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed. Please be aware these goods are heavy and it is the customer’s responsibility to check measurements for delivery before orders are placed and to be able to receive the goods over two days.

Learn More

Oil-based inks that wash away safely with liquid soap and water. Suitable for all types of relief or block printing, such as woodcut and wood engraving, letterpress and linocut. This range contains less than 1% of driers. For faster drying rates, add a small amount of cobalt or manganese driers. Formulated with excellent light fast pigments for non-toxic printmaking or solvent-free cleaning.

Learn More

Great quality acrylic paints ideal to use in silkscreen printing. Mix the colours undiluted to obtain the desired hue and then add the Lascaux Screenprinting Paste. It is advisable to experiment initially, to determine satisfactory working mixes. To find a satisfactory working ratio, it is useful to first print colours using a 50/50 mixture of undiluted colour to paste and to then shift the ratio depending on the results. *Please note, this range is stored offsite. Please allow extra time for your order to be processed and dispatched. Learn More

Great quality acrylic paints ideal to use in silkscreen printing. Mix the colours undiluted to obtain the desired hue and then add the Lascaux Screenprinting Paste. It is advisable to experiment initially, to determine satisfactory working mixes. To find a satisfactory working ratio, it is useful to first print colours using a 50/50 mixture of undiluted colour to paste and to then shift the ratio depending on the results. Learn More

Charbonnel Earths Learn More

A red amorphous powder consisting of ferric chloride oxide. Used as a colourant for ceramic glazes. Also used in polishing glass, metal, or gems. Also known as jeweller's rouge. Learn More

Gamblin Relief Inks are formulated for all relief techniques, including woodblock, linocut, monotype, and Solarplate. They contain the right amount of stiffness and tack to hold fine detail yet spread evenly on the block or plate. The palette of ten colors is designed to give artists intense pure pigmented colors straight from the jar, along with a wide range of color mixing capabilities. Gamblin Relief Inks are all bound in the highest quality Burnt Plate Oil. Learn More

Oil-based and washable - Artist quality etching inks for non-toxic printmaking. Solvent-free cleaning and lightfast, this unique range of etching inks can be washed away with liquid soap and water. Suitable for all types of intaglio printing e.g. etching, aquatint and line engraving. This range does not contain any driers. For faster drying rates, add a small amount of cobalt or manganese driers.

Learn More

Lascaux Studio Original is an artists’ quality acrylic paint. This exceptional quality acrylic is highly versatile and suitable for all painting techniques. The paint is highly pigmented, lightfast, non-ageing and non-yellowing with very good coating flexibility and water-resistant when dry. The colour range is optimised to give the same working qualities for each colour. So all colours have the same viscosity, opacity and dry to the same semi-gloss sheen. This uniform covering power is ideal for effortless creation of monochrome surfaces. There is also minimal colour shift from wet to dry. *Please note, this range is stored offsite. Please allow extra time for your order to be processed and dispatched. Learn More